Tri-Clamp Elbows & Bends

45° and 90° sanitary Tri-Clamp elbows, 180° return U-bends, and hybrid clamp-to-weld, BSM/RJT union, or hose-tail elbows in 304 and 316L stainless steel.

Tri-Clamp Elbows & Bends products

Showing 1–10 of 10 results
Loading products…

45°, 90° and 180° sanitary clamp bends

All Tri-Clamp elbows maintain smooth internal radius sweep profiles for cleanability during CIP cycles. Standard 45° and 90° Tri-Clamp elbows terminate in matched weld-on/integral ferrules, while 180° return U-bends connect parallel twin-tube runs.

Hybrid Tri-Clamp elbows (clamp-to-weld, union, or hose barb)

When space does not allow a separate adapter + standard elbow, hybrid models pair one Tri-Clamp ferrule with a butt-weld bevel end, BSM/RJT hygienic union nut, or serrated hose tail.

Key specification checks

  • Verify 45°, 90°, or 180° bend angle and center-to-face clearances on existing racks.
  • Check hybrid models when connecting clamped manifolds directly into welded lines or hoses.

Filter & browse

Filter by category or jump to collection

Frequently asked questions

Can I request exact center-to-face dimensions before fabricating manifold spools?

Yes. State your required tube OD, bend angle (45°, 90°, or 180°), and alloy on your RFQ so our team can confirm the exact center-to-face dimension and order drawing.

Are clamping ferrules on elbows compatible with standard 13MHH clamps and gaskets?

Yes—standard inch OD-tube Tri-Clamp elbows match standard ferrule flange ODs (e.g. 50.5 mm on 1" and 1½") and pair with standard clamps and gaskets matching tube bore.

How do I identify a 2-inch elbow for an existing spool?

Record the nominal size and connection series at each end, then measure the angle and center-to-face distance. For a mixed-end elbow, identify the Tri-Clamp end and the weld or hose end separately.

LET’S TALK ABOUT YOUR PROJECT

Discuss your Tri-Clamp Elbows & Bends requirements

Send a size and quantity list, or describe your BOM and interface requirements. Drawings can follow by email.

Send an inquiry

Known part lists, partial caliper measurements or unknown replacement parts are all welcome.

Photos, drawings or BOM? Submit this form to get an inquiry number, then send files by email.

Cookie & privacy preferences

Choose which storage categories you allow. Privacy policy

NecessaryAlways enabled

Required to remember your privacy preference and active inquiry session.

Preference lifetime
180 days
Inquiry session
30 minutes
Analytics

Helps us understand catalog usage and improve technical pages.

Advertising measurement

Used only when ad campaign measurement is enabled.

About measurement

Analytics and advertising storage remain off until you grant consent.

You can revisit these preferences any time from the footer.