Tri-Clamp Ferrules

Tri-Clamp ferrules, also called Tri-Clover ferrules, include short 14WMP, medium 14MMP and long 14AMP weld ends, plus extended-neck, heavy-wall and roll-on options. Use the tube OD, flange OD and available weld clearance to narrow the selection.

Tri-Clamp Ferrules products

Showing 1–7 of 7 results
Loading products…

Choosing butt-weld lengths for 14WMP, 14MMP and 14AMP

Choose the weld neck for access around the flange shoulder and nearby fittings. Compare length D for the tube size and model on its drawing. Use the separate wall and dimensional tables for heavy-wall ferrules.

Expanding (roll-on) grooved ferrules

The CEF-22-A / 14RMP roll-on ferrule uses a grooved bore with an expanding process. Check tube wall and the forming method on the product drawing before selecting this option.

Key specification checks

  • Match axial length D to welding access: 14WMP short, 14MMP medium, 14AMP long, or extended weld neck.
  • Separate thin-wall OD-tube butt-weld ferrules from roll-on expanding and Schedule/heavy-wall 316L ferrules.

Filter & browse

Filter by category or jump to collection

Frequently asked questions

Does a 50.5 mm flange automatically mean 1½ inch tube?

No. In the inch OD-tube series, both 1" (tube OD 25.4 mm, bore 22.2 mm) and 1½" (tube OD 38.1 mm, bore 34.8 mm) use a 50.5 mm flange OD. Always measure tube OD (B) and bore (A).

When should I pick 14MMP or 14AMP instead of 14WMP?

Choose a longer neck if a weld head, purge fixture or nearby elbow leaves too little straight access behind the flange. Compare the D dimension for the exact size and model.

What measurements help quote an 8-inch Tri-Clamp ferrule?

Send the tube OD, bore, flange OD, available weld-neck length and tube or pipe series. Use the model drawing to confirm dimensions. The 14WMP reference chart lists an 8-inch row with the axial length blank.

LET’S TALK ABOUT YOUR PROJECT

Discuss your Tri-Clamp Ferrules requirements

Send a size and quantity list, or describe your BOM and interface requirements. Drawings can follow by email.

Send an inquiry

Known part lists, partial caliper measurements or unknown replacement parts are all welcome.

Photos, drawings or BOM? Submit this form to get an inquiry number, then send files by email.

Cookie & privacy preferences

Choose which storage categories you allow. Privacy policy

NecessaryAlways enabled

Required to remember your privacy preference and active inquiry session.

Preference lifetime
180 days
Inquiry session
30 minutes
Analytics

Helps us understand catalog usage and improve technical pages.

Advertising measurement

Used only when ad campaign measurement is enabled.

About measurement

Analytics and advertising storage remain off until you grant consent.

You can revisit these preferences any time from the footer.