Long Tri-Clamp Weld Ferrule
The long weld ferrule uses an extended straight tube section between the clamp sealing face and the tube weld end.
Material | SS304, SS316L |
|---|
Product overview
Construction and mating components
The long ferrule combines one clamp sealing face with an extended weld neck, adding straight length between the clamp joint and weld edge. It is a separate construction from the 12.7 mm 14WMP, 21.5 mm 14MMP and 28.6 mm 14AMP ferrules. The series lists 1/2"–12" or DN10–DN300; specify the long ferrule axial length separately rather than using a short-ferrule D column.
Which dimensions identify this ferrule?
Specify the tube outside diameter, bore, clamp-flange outside diameter and axial length separately. Match the end form and sealing face to the actual mating parts; a shared flange diameter alone does not establish interchangeability.
Technical specifications
Product series
- Flange end
- Tri-Clamp (Product series)
- Pipe end
- Weld end (Product series)
- Series size range
- 1/2"-12" or DN10-DN300 (Nominal tube series range; specify the long ferrule axial length separately.)
- Connection
- Tri Clamp (Connection of this fitting; match the ferrule and seal to the selected dimensional standard.)
- Seal material options
- Silicone, Viton, PTFE (Mating union seal material options; specify one material with the ordered joint.)
Construction & finish
- Manufacturing process
- CNC Lathe Machine (Body surface and manufacture)
- Surface roughness
- Ra≤0.8 (Body surface and manufacture)
Need a different size, connection or document?
Discuss your requirements