Tri-Clamp Adapters

Two-end transition adapters pairing Tri-Clamp ferrules with BSM, RJT, DIN 11851, SMS, BSPP/BSPT/NPT industrial threads, or weld ends in stainless steel.

Tri-Clamp Adapters products

Showing 1–8 of 8 results
Loading products…

Cross-standard transitions: Tri-Clamp to BSM, RJT, DIN & SMS

Because Australian/NZ BSM and RJT unions, European DIN 11851 / SMS unions, and Tri-Clamp ferrules use incompatible sealing faces and clamp vs threaded nut fasteners, a dedicated transition adapter keeps the pressure boundary engineered rather than improvised.

Tri-Clamp to industrial BSPP, BSPT & NPT threads

Male and female threaded clamp adapters bridge sanitary tubing directly onto utility gauges, spray nozzles, compressed-air lines, or threaded pump ports. Confirm thread pitch and sealing method (O-ring face vs PTFE thread tape on tapered threads).

Key specification checks

  • Bridge regional standards cleanly (such as Tri-Clamp AU/NZ dairy skids to BSM or RJT tanks).
  • State male vs female thread gender and parallel vs tapered form (BSPP vs BSPT vs NPT).

Filter & browse

Filter by category or jump to collection

Frequently asked questions

How do I specify both ends of a Tri-Clamp adapter in my RFQ?

List End A (Tri-Clamp tube OD × flange OD) and End B separately: union series (BSM, RJT, DIN, SMS) with male threaded vs plain liner + nut, or thread form (BSPP / BSPT / NPT) with male/female gender.

Are BSP and NPT threaded Tri-Clamp adapters interchangeable?

No. BSP (55° thread angle) and NPT (60° thread angle) differ in flank angle and most pitches. Mixing them risks galling stainless steel threads and leaking.

How should I list a 2-inch Tri-Clamp × threaded adapter?

Write the Tri-Clamp series and nominal size for the first end. For the threaded end, list the thread standard, nominal size and male or female form. Include a drawing or photo if the existing thread is unmarked.

LET’S TALK ABOUT YOUR PROJECT

Discuss your Tri-Clamp Adapters requirements

Send a size and quantity list, or describe your BOM and interface requirements. Drawings can follow by email.

Send an inquiry

Known part lists, partial caliper measurements or unknown replacement parts are all welcome.

Photos, drawings or BOM? Submit this form to get an inquiry number, then send files by email.

Cookie & privacy preferences

Choose which storage categories you allow. Privacy policy

NecessaryAlways enabled

Required to remember your privacy preference and active inquiry session.

Preference lifetime
180 days
Inquiry session
30 minutes
Analytics

Helps us understand catalog usage and improve technical pages.

Advertising measurement

Used only when ad campaign measurement is enabled.

About measurement

Analytics and advertising storage remain off until you grant consent.

You can revisit these preferences any time from the footer.