Sanitary Tri-Clamp End-Cap Style Concentric Reducer
Compact disc-style Tri-Clamp end cap reducer in 304L or 316L stainless steel combining a larger base clamp cap with a concentric smaller Tri-Clamp ferrule port across 2"×1-1/2" to 4"×1-1/2" sizes.
Material Options | Stainless Steel 304L / Stainless Steel 316L |
|---|---|
Process Connection | Tri-Clamp × Tri-Clamp (End-Cap Disc to Concentric Ferrule) |
Reducing Size Combinations | 2"×1-1/2", 2-1/2"×1-1/2", 3"×1", 3"×1-1/2", 3"×2", 3-1/2"×2", 4"×1-1/2" |
Reducer Geometry | Flat End-Cap Base Disc with Short Central Reducing Ferrule Neck |
Component form | Concentric stepped end-cap reducer |
Size
Product overview
Space-Saving End-Cap Reducer Geometry
Unlike long tapered conical reducers (31-14MP), a Tri-Clamp end cap reducer transitions between two clamp sizes within the thickness of a blind cap plus a short ferrule neck. A large Tri-Clover end-cap disc forms the major port, while a smaller concentric Tri-Clamp ferrule projects directly from its center.
Cataloged in both 304L and 316L stainless steel, this compact profile fits tight vessel headers, sight-glass mounts, and instrumentation takeoffs where axial space is restricted.
Seven Listed Reducing Combinations (2" to 4")
The product schedule offers seven imperial size reductions in 304L and 316L: 2" × 1-1/2", 2-1/2" × 1-1/2", 3" × 1", 3" × 1-1/2", 3" × 2", 3-1/2" × 2", and 4" × 1-1/2".
The companion END CAP REDUCER dimensional chart illustrates the major cap diameter, minor ferrule diameter, and compact overall height.
Flow Orientation & Drainability Considerations
Because the internal transition steps abruptly across a flat end-cap shoulder rather than a gradual cone, mounting on horizontal liquid lines can trap residual fluid at the bottom of the larger ferrule.
Use end-cap reducers primarily on vertical runs, top tank nozzles, gas/vapor lines, or compact gauge/sensor ports where minimal build height is the priority.
Technical specifications
Product specifications
- Connection System
- Tri-Clamp
END CAP REDUCER Dimensional Chart
series reference table (in) for END CAP REDUCER Dimensional Chart. Compare selected size with callouts; do not assume cross-manufacturer interchangeability.
Units: in
| SIZE | Height (IN) |
|---|---|
| 2" x 1-1/2" | 1-1/8" |
| 2-1/2" x 1-1/2" | 1-1/8" |
| 3" x 1" | 1-1/8" |
| 3" x 1-1/2" | 1-1/8" |
| 3-1/2" x 2" | 1.55" |
| 4" x 1-1/2" | 1-1/8" |
Need a different size, connection or document?
Discuss your requirements
