RJT Male Single-Swaged Hosetail

A grade 304 stainless steel hose tail combining a single circumferential swaged bead on the hose shank with a pre-welded RJT male union part. Listed across six nominal sizes from 1 inch to 4 inches.

Material	304
Connection	RJT male union thread (pre-welded) × single-swaged hose tail
Body construction	Straight hosetail pre-welded to an RJT male part with O-ring groove
Nominal sizes	1″–4″ (25.4–101.6 mm)
Retention profile	Single circumferential swaged bead on 127–161 mm body

Size

Request a quote View specifications

Single-swaged hose shank with pre-welded RJT male part

This hosetail terminates a flexible hose with a threaded RJT male union end rather than a liner. Each fitting is supplied pre-welded with an RJT male part (including its external thread and O-ring face groove) at one end and a tubular hose shank with one circumferential swaged bead at the other.

Direct connection to female RJT union assemblies

Because the fitting carries the threaded RJT male part, it connects directly to a mating RJT liner and union nut on a manifold, tank valve or female-ended hose without needing a nut on this hosetail. On the hose side, clamps or a crimp sleeve engage behind the single raised bead.

Grade 304 size range and axial lengths

The catalog schedule lists six grade 304 stainless steel sizes from 1 inch (25.4 mm) to 4 inches (101.6 mm). Overall length (B) is 127 mm across the 1-inch through 3-inch sizes and increases to 161 mm on the 4-inch size, while bead outside diameter (C on the dimensional drawing) ranges from 29.4 mm to 105.6 mm.

Wall thickness conflict and seal pairing

The option schedule records wall thickness as 1.5 whereas the native web diagram marks the wall thickness as 2.0. Verify the actual wall thickness for your hose attachment method, and pair the RJT male face groove with the matching RJT O-ring before tightening the union.