RJT Male Hose Joiner with Handle

A grade 316 stainless steel twin-male RJT spool with a central positioning handle for coupling two RJT female hose assemblies. Listed across 2-inch to 4-inch nominal sizes with a 200 mm body length.

Material	316
Connection	Twin RJT male union ends (for joining two RJT female hoses)
Body construction	Straight 200 mm spool with twin RJT male ends and central T-bar handle
Nominal sizes	2″–4″ (50.8–101.6 mm)
Handle geometry	Radial 140 mm positioning handle perpendicular to spool

Size

Request a quote View specifications

Joining two female RJT hose assemblies in line

This double-ended joiner couples two flexible hoses that are each terminated with RJT female union ends (liner and hex or slotted nut). Both ends of the joiner are machined as RJT male parts with O-ring grooves, creating a rigid intermediate spool between the two hose runs.

Central handle for positioning and spanner reactions

A radial bar handle is welded to the center of the tube body so operators can lift, align and steady the joiner while engaging the heavy hose nuts on each side. The handle also helps resist body rotation while tightening or loosening the two RJT union nuts.

Grade 316 material and dimensional envelope

The supplier catalog lists all three sizes—2 inch (50.8 mm), 3 inch (76.2 mm) and 4 inch (101.6 mm)—in grade 316 stainless steel. Across the series, overall spool length (B) is fixed at 200 mm and handle projection (C) is 140 mm, while nominal diameter (A) matches the selected 50.8, 76.2 or 101.6 mm line size.

Assembly seals and clearance planning

Each RJT male end requires its own RJT O-ring seal to mate against the incoming female hose liner. Support both hoses near the joint to limit bending load on the unions, and allow radial clearance around the 140 mm handle projection for spanner swing and floor routing.