Wire-Clip Fixed Spray Ball

A fixed CIP spray ball with a wire-retained inlet collar and round spray holes. The clip connection provides a removable mounting arrangement, with SS304 and SS316L material options.

Connection	Inlet collar with retaining wire clip
Material	SS304, SS316L
Spray head structure	Stationary spherical head with round openings
Listed spray patterns	180° / 360° (configuration-dependent)
Listed series size range	0.5"–2.5" (DN15–DN65)

Request a quote View specifications

Wire-retained inlet collar

The assembly has a perforated spherical head, a tubular inlet collar and an external wire clip. The clip forms part of the mounting arrangement. Match the collar and retaining details to the supply connection, and check that the clip can be fitted and removed in the planned installation position.

Fixed spray openings

Cleaning liquid enters the stationary head and leaves through the spray holes. Unlike a rotating head, this component uses a fixed opening arrangement. Its installation position and the selected hole pattern should therefore be considered together with the vessel geometry and internal fittings.

Listed pattern options

The series description includes 180° and 360° fixed-spray patterns and a nominal 2.5 mm hole diameter for the listed fixed-cleaning series. These are source-series descriptions, not a guarantee that one configuration cleans every surface. Specify the required pattern and review the cleaning arrangement for the complete vessel.

Pipe-series dimensions and maintenance

The dimensional reference separates DIN, 3A, SMS and ISO inlet-bore columns. Use the column and complete row corresponding to the selected pipe series. The listed series offers SS304/SS316L and ½–2½ inch, DN15–DN65 options. Plan access to inspect the retaining clip, collar and openings during routine maintenance; supply requirements depend on the chosen spray configuration.

Need a different size, connection or document?

Discuss your requirements