BSP Long Screw Pipe Nipple (Long BSPP Male × BSPT Male) in 316/316L Pipe
BSP Long Screw Pipe Nipple (Long BSPP Male × BSPT Male) in 316/316L Pipe designed with Long BSPP Parallel Male (Running Thread) × BSPT Taper Male connections for industrial stainless steel threaded piping. Constructed as a machined from 316/316L seamless pipe with one long parallel running thread and one taper thread in 316 / 316L Seamless Stainless Steel Pipe (ASTM A312). Available across nominal sizes 1/2" to 2".
Thread Interface | Long BSPP Parallel Male (Running Thread) × BSPT Taper Male |
|---|---|
Material & Stock | 316 / 316L Seamless Stainless Steel Pipe (ASTM A312) |
Nominal Size Range | 1/2" to 2" |
Body structure | Machined from 316/316L seamless pipe with one long parallel running thread and one taper thread |
Component form | Straight unequal-thread long screw pipe nipple |
Size
Product overview
Connection Geometry & 316 Stainless Steel Construction
This BSP long screw pipe nipple (long BSPP male × BSPT male) in 316/316L pipe is machined from 316/316L seamless pipe with one long parallel running thread and one taper thread in a straight unequal-thread long screw pipe nipple profile, providing Long BSPP Parallel Male (Running Thread) × BSPT Taper Male connections for modular stainless steel piping, equipment hookups, and manifold assemblies. Manufactured in 316 / 316L Seamless Stainless Steel Pipe (ASTM A312), the fitting offers molybdenum-bearing austenitic corrosion resistance suited for process water, chemical transfer, utility air, and washdown environments.
Size Coverage & Thread Assembly
The series covers nominal sizes across 1/2" to 2". Refer to the dimensional schedule on this product page to match each thread size against its corresponding envelope length, outside diameter or across-flats width, and unit weight. Before installing this BSP long screw pipe nipple (long BSPP male × BSPT male) in 316/316L pipe, verify that your mating ports match the Long BSPP Parallel Male (Running Thread) × BSPT Taper Male interface and select an appropriate thread sealant or gasket for the joint. Specify the required nominal size from 1/2" to 2" and confirm installation clearance when ordering.
Technical specifications
Dimensions · CH-F017
Applies only to the listed references; other material or end forms are outside this scope.
Units: SIZE: nominal pipe size; KG EACH: kg per piece. Length units appear beside applicable values.
| Nominal size | Chelsey reference | Marked length | A | B | C | Unit weight (kg) |
|---|---|---|---|---|---|---|
| 1/2 | CH-F017-001 | 100MM | 21.34 | 100 | 52 | 0.09 |
| 3/4 | CH-F017-002 | 100MM | 26.67 | 100 | 54 | 0.12 |
| 1 | CH-F017-003 | 150MM | 33.4 | 150 | 62 | 0.28 |
| 1-1/4 | CH-F017-004 | 150MM | 42.16 | 150 | 70 | 0.37 |
| 1-1/2 | CH-F017-005 | 150MM | 48.26 | 150 | 71 | 0.43 |
| 2 | CH-F017-006 | 150MM | 60.33 | 150 | 82 | 0.54 |
Temperature/pressure reference · CH-F017
Applies only to the listed references; other material or end forms are outside this scope. Temperatures may be interpolated; values refer to the internal fluid temperature and exclude piping loads, stresses and moments.
Units: °C / BAR
| Temperature (°C) | Pressure (BAR) |
|---|---|
| -20 to 40 | 50 |
| 100 | 50 |
| 150 | 35 |
| 200 | 25 |
| 220 | 20 |
Need a different size, connection or document?
Discuss your requirements
